Документация по AIX: Справочник программиста:
G

Текущий просмотр: Справочник программиста
Просмотры: [ Книги | Команды | Справочник программиста | Задачи и разделы ]
?СПРАВКА
[Назад] Назад

Справочник по программированию
G
G32ALLOC Starts interaction with an API application running simultaneously on the local system.
G32DLLOC Terminates interaction with an API application running simultaneously on the local system.
G32READ Receives a message from the API application running simultaneously on the local system.
G32WRITE Sends a message to an API application running simultaneously on the local system.
GetUserAuths Accesses the set of authorizations of a user.
g32_alloc Initiates interaction with a host application.
g32_close Detaches from a session.
g32_dealloc Ends interaction with a host application.
g32_fxfer Invokes a file transfer.
g32_get_cursor Sets the row and column components of the structure to the current cursor position in a presentation space.
g32_get_data Obtains current specified display data from the presentation space.
g32_get_status Returns status information of the logical path.
g32_notify Turns data notification on or off.
g32_open Attaches to a session. If the session does not exist, the session is started.
g32_openx Attaches to a session and provides extended open capabilities. If the session does not exist, the session is started.
g32_read Receives a message from a host application.
g32_search Searches for a character pattern in a presentation space.
g32_send_keys Sends key strokes to the terminal emulator.
g32_write Sends a message to a host application.
gai_strerror Facilitates consistent error information from EAI_* values returned by getaddrinfo ().
gamma Computes the natural logarithm of the gamma function.
garbagedlines Discards and replaces a number of lines in a window.
gcd Multiple-precision integer arithmetic.
gcvt Converts a floating-point number to a string.
get_auth_method Returns the list of authentication methods for the secure rcmds.
get_myaddress Gets the user's Internet Protocol (IP) address.
get_speed Set and get the terminal baud rate.
get_wctype Obtains a handle for valid property names in the current locale for wide characters.
getaddrinfo Protocol-independent hostname-to-address translation. Note: Hostname-to-address translation is done in a protocol-independent fashion using this function. Attention: This specification is taken from IEEE POSIX 1003.1g (Protocol Independent Interfaces) DRAFT 6.3. This function may be modified to match that specification as it develops. Should there be any discrepancies between this description and the POSIX description, the POSIX description takes precedence.
getadmin Returns a pointer to a module.
getargs Gets arguments of a process.
getaudithostattr Accesses the host information in the audit host database.
getbegyx Gets the cursor and window coordinates.
getc Gets a character or word from an input stream.
getc_unlocked stdio with explicit client locking.
getch Gets a single-byte character from the terminal.
getchar Gets a character or word from an input stream.
getconfattr Accesses the system information in the user database.
getcontext Initializes the structure pointed to by ucp to the context of the calling process.
getcwd Gets the path name of the current directory.
getdate Convert user format date and time.
getdomainname Gets the name of the current domain.
getdtablesize Gets the descriptor table size.
getegid Gets the process group IDs.
getenv Returns the value of an environment variable.
geteuid Gets the real or effective user ID of the current process.
getevars Gets environment of a process.
getfsent Gets information about a file system.
getfsent_r Gets information about a file system.
getfsfile Gets information about a file system.
getfsspec Gets information about a file system.
getfstype Gets information about a file system.
getgid Gets the process group IDs.
getgrent Accesses the basic group information in the user database.
getgrgid Accesses the basic group information in the user database.
getgrgid_r Gets a group database entry for a group ID.
getgrnam Accesses the basic group information in the user database.
getgrnam_r Search a group database for a name.
getgroupattr Accesses the group information in the user database.
getgroups Gets the supplementary group ID of the current process.
getgrpaclattr Accesses the group screen information in the SMIT ACL database.
getgrset Accesses the concurrent group set information in the user database.
gethostbyaddr Gets network host entry by address.
gethostbyname Gets network host entry by name.
gethostent Retrieves a network host entry.
gethostid Gets the unique identifier of the current host.
gethostname Gets the name of the local host.
getinterval Manipulates the expiration time of interval timers.
getipnodebyaddr Address-to-nodename translation.
getipnodebyname Nodename-to-address translation.
getitimer Manipulates the expiration time of interval timers.
getlogin Gets a user's login name.
getlogin_r Gets a user's login name.
getmaxyx Gets the cursor and window coordinates.
getmid Returns a module ID.
getmsg Gets the next message off a stream.
getnameinfo Hostname-to-service name translation [given the binary address and port].
getnetbyaddr Gets network entry by address.
getnetbyname Gets network entry by name.
getnetent Gets network entry.
getnetgrent Handles the group network entries.
getnetname Installs the network name of the caller in the array specified by the name parameter.
getnstr Gets a multi-byte character string from the terminal.
getopt Returns the next flag letter specified on the command line.
getpagesize Gets the system page size.
getparyx Gets the cursor and window coordinates.
getpass Reads a password.
getpcred Reads the current process credentials.
getpeername Gets the name of the peer socket.
getpenv Reads the current process environment.
getpgid Returns the process group ID of the calling process.
getpgrp Returns the process ID, process group ID, and parent process ID.
getpid Returns the process ID, process group ID, and parent process ID.
getpmsg Gets the next priority message off a stream.
getportattr Accesses the port information in the port database.
getppid Returns the process ID, process group ID, and parent process ID.
getpri Returns the scheduling priority of a process.
getpriority Gets or sets the nice value.
getprocs Gets process table entries.
getprotobyname Gets protocol entry from the /etc/protocols file by protocol name.
getprotobynumber Gets a protocol entry from the /etc/protocols file by number.
getprotoent Gets protocol entry from the /etc/protocols file.
getpw Retrieves a user's /etc/passwd file entry.
getpwent Accesses the basic user information in the user database.
getpwnam Accesses the basic user information in the user database.
getpwnam_r Accesses the basic user information in the user database.
getpwuid Accesses the basic user information in the user database.
getpwuid_r Accesses the basic user information in the user database.
getq Gets a message from a queue.
getrlimit Controls maximum system resource consumption.
getrlimit_64 Controls maximum system resource consumption.
getroleattr Accesses the role information in the roles database.
getrpcbyname Accesses the /etc/rpc file.
getrpcbyname_r Accesses the /etc/rpc file.
getrpcbynumber Accesses the /etc/rpc file.
getrpcbynumber_r Accesses the /etc/rpc file.
getrpcent Accesses the /etc/rpc file.
getrusage Displays information about resource use.
getrusage_64 Displays information about resource use.
gets Gets a string from a stream.
getservbyname Gets service entry by name.
getservbyport Gets service entry by port.
getservent Gets services file entry.
getsid Returns the session ID of the calling process.
getsmuxEntrybyidentity Retrieves SNMP multiplexing (SMUX) peer entries from the /etc/snmpd.peers file or the local snmpd.peers file.
getsmuxEntrybyname Retrieves SNMP multiplexing (SMUX) peer entries from the /etc/snmpd.peers file or the local snmpd.peers file.
getsockname Gets the socket name.
getsockopt Gets options on sockets.
getssys Reads a subsystem record.
getstr Gets a multi-byte character string from the terminal.
getsubopt Parse suboptions from a string.
getsubsvr Reads a subsystem record.
getsyx Retrieves the current coordinates of the virtual screen cursor.
getthrds Gets kernel thread table entries.
gettimeofday Displays, gets and sets date and time.
gettimer Gets or sets the current value for the specified systemwide timer.
gettimerid Allocates a per-process interval timer.
getttyent Gets a tty description file entry.
getttynam Gets a tty description file entry.
getuid Gets the real or effective user ID of the current process.
getuinfo Finds a value associated with a user.
getuserattr Accesses the user information in the user database.
getuserpw Accesses the user authentication data.
getusraclattr Accesses the user screen information in the SMIT ACL database.
getutent Accesses utmp file entries.
getutid Accesses utmp file entries.
getutline Accesses utmp file entries.
getvfsbyflag Gets a vfs file entry.
getvfsbyname Gets a vfs file entry.
getvfsbytype Gets a vfs file entry.
getvfsent Gets a vfs file entry.
getw Gets a character or word from an input stream.
getwc Gets a wide character from an input stream.
getwchar Gets a wide character from an input stream.
getwd Gets current directory path name.
getws Gets a string from a stream.
getyx Gets the cursor and window coordinates.
glob Generates path names.
globfree Frees all memory associated with the pglob parameter.
gmtime Converts the formats of date and time representations.
gmtime_r Converts the formats of date and time representations.
grantpt Changes the mode and ownership of a pseudo-terminal device.
gsignal Implements a software signal facility.
gtty Sets or gets terminal state.