[ Previous | Next | Table of Contents | Index | Library Home | Legal | Search ]

Commands Reference, Volume 3


istat Command

Purpose

Examines i-nodes.

Syntax

istat {FileName | i-nodeNumber Device}

Description

The istat command displays the i-node information for a particular file. You can specify the file either by providing a file or directory name with the FileName parameter or by providing an i-node number with the i-nodeNumber parameter and a device name with the Device parameter. You can specify the Device parameter as either a device name or as a mounted file system name.

If you specify the FileName parameter, the istat command writes the following information about the file:

If you specify the i-nodeNumber and Device parameters, the istat command also displays, in hexadecimal values, the block numbers recorded in the i-node.

Note: The Device parameter cannot refer to a remote device.

Examples

  1. To display the information in the i-node corresponding to the /usr/bin/ksh file, enter:

    istat /usr/bin/ksh
    

    This command displays the i-node information for the /usr/bin/ksh file. The information looks similar to the following:

    Inode 10360 on device 10/6    File
    Protection: r-xr-xr-x
    Owner: 2(bin)     Group: 2(bin)
    Link count: 2     Length 372298 bytes
       
    Last updated:  Wed May 13 14:08:13 1992
    Last modified: Wed May 13 13:57:00 1992
    Last accessed: Sun Jan 31 15:49:23 1993
    
  2. To display i-node information by specifying a file i-node number, enter:

    istat 10360 /dev/hd2
    

    This command displays the information contained in the i-node identified by the number 10360 on the /dev/hd2 device. In addition to the information shown in Example 1, this displays:

    Block pointers (hexadecimal):
    2a9a   2a9b   2a9c   2a9d   2a9e   2a9f   2aa0   2aa1
    

    These numbers are addresses of the disk blocks that make up the /usr/bin/ksh file.

Files


/usr/bin/istat Contains the istat command.

Related Information

The fsdb command.

The filesystems file, jfs/filsys.h file.

File Systems Overview for System Management in AIX 5L Version 5.1 System Management Concepts: Operating System and Devices explains file system types, management, structure, and maintenance.

Files Overview in AIX 5L Version 5.1 System User's Guide: Operating System and Devices provides information on working with files.

Directory Overview in AIX 5L Version 5.1 System User's Guide: Operating System and Devices provides an introduction on i-nodes and how they are used by the file system.


[ Previous | Next | Table of Contents | Index | Library Home | Legal | Search ]